Products

Drum installations

Installation with drum and rubber or metal strip, for small and medium parts

Hook installations

Hook installation for suspended parts, for all parts sizes

Tunnel type installations

Tunnel installation with continuous flow rollers for sheets, profiles, metal structures

Metal strip installations

Tunnel installation with wire mesh or rubber band for more sensitive parts (type Al). They have a very high productivity working in continuous flow

Wire installations

Continuous flow tunnel type installation for wire, bars, rectangular pipes. Installations that can reach very high speeds up to 200 m / min

Pipe installations

Continuous flow tunnel type installation for round pipes, long round parts, cylinders. The parts are driven by biconical rollers.

Special installations

Special installations for atypical parts, for theme applications

THM continuous tape installations

Special installations for atypical parts, for theme applications

Ecological sandblasting installation

Ecological sandblasting installation with baking soda for non-abrasive, non-destructive cleaning. for high precision parts.

Sandblasting cabinet

Automated or manual sandblasting cabinets for smaller parts

Mobile sandblasting installations

Mobile sandblasting equipment used where the sandblasting body cannot move

Blasting installations for inside the pipes

Blasting installations for inside the pipes are complete systems for ecological blasting.

Sandblasting chambers

There are sandblasting installations used for large and very large parts: oversized parts, complex metal structures, railway wagons, etc.

Wet sandblasting

Wet sandblasting machines use abrasive media and water to obtain a very smooth and fine surface finishing effect.

Sandblasting with robotic arm

The blasting machine with robotic arm is designed and manufactured for professional use.

Sandblasting 3D printed parts

Sandblasting plant for additive manufacturing or 3D printer parts

ASP 1200 - ECO

Shot Peening multifunctional cell

ARSP + ARGB System

Shot Peening of landing gear components

ASP PEENLINE 4/1000 ECO

Shot Peening of different types of metal or alloy construction parts

VACUUPRESS 60 SX - PNEUM

Sanding and clearing without mobile dust 60 SX PNEUM

ASP-1500 ECO

Controlled and repeatable shot peening

CSP 1300 ROT

Shot Peening of jet engine blades

BLAST 20-20 NP

Shot Peening of aircraft engine components

KOMBI BLAST 2 S-PEEN

Shot Peening of special leaf springs

CF CIRCULAR VIBRATORY FINISHERS

CB CIRCULAR VIBRATORY FINISHERS

CD CIRCULAR VIBRATORY FINISHERS

CM CIRCULAR VIBRATORY FINISHERS

MV MULTIVIBRATORY FINISHERS

TFM VIBRATORY FINISHERS

TMV VIBRATORY FINISHERS

AV UNIT

TT A/2C CENTRIFUGAL DISC FINISHER

TT SM CENTRIFUGAL DISC FINISHER

TT B CENTRIFUGAL DISC FINISHER

G-SERIES VIBRATION DRYER

DLT DRUM DRYER

BF-HL BELT DRYER

E5 MINI BARREL

ROTATING BARREL FINISHERS

CENTRIFUGES

FLOCCULANT UNITS

TRT 83 X 37 CLEANING TROUGH

CUTLERY CLEANING

M-TMD

Automatic painting system

The positions of the parts are identified by infrared sensors, and the entire system is controlled by the PLC.

Manual painting system

The painting systems offered by us are based on various flow rates or physico-chemical characteristics of the paints.

Painting booths

Paint booths are booths that can be used for spraying with paint and / or drying.

ROTAMAT R 60

Capacity between 2 and 15 L, respectively batch weight of maximum 25 kg. Manual tilting of the rotary drum.

ROTAMAT R 80

Our latest model, the Rotamat R 80, was developed in 2016 and processes 50 litres of filling volume or 50 kg of weight.

ROTAMAT R 90 C

With a processing volume of 75 litres, you can coat even large batches quickly and efficiently. 

Filter installations for coarse particles

The labyrinth filter is composed of cardboard folds with the role of pre-separating paint splashes. The filter is available in different widths.

Filter systems for fine particles

The filter is composed of polyester fibers with progressive structure and is used for the ceiling of the painting booths.

RTO (Regenerative Thermal Oxidizer)

RTO (Regenerative Thermal Oxidizer) is a system with 2 or 3 oxidation chambers for the elimination of Volatile Organic Compounds (VOCs) resulting from the use of solvent-based products (eg paints, adhesives) in industry.

Activated carbon filtration

Activated carbon filtration is applied in all industrial processes where it is necessary to retain and remove C.O.V. or odors with a low concentration: paint lines, chemical industry, food industry, etc.

EdgeBreaker® 1000

The EdgeBreaker® 1000 is ideal for small parts. It deburrs and edge rounds single-sided, while also being able to provide the material with the desired finish.

EdgeBreaker® 2000

High quantities but still flexible for different edge requirements: the quick change of the brushes allows for individual deburring or rounding on each side. The machine is ideal for your processing needs and operates double-sided.

EdgeBreaker® 3000

Especially when cutting with a fiber laser, the EdgeBreaker® 3000 is able to remove the hard-adhering burrs and splatters while also providing a high quality edge rounding result. This machine allows you to both deburr and edge round, double-sided in just one pass.

EdgeBreaker® 4000

Flexibility is the key to the EdgeBreaker® 4000: After the burrs and slag caused by flame cutting have been removed via the grinding drum, you can simply choose between double-sided deburring or edge rounding. Specifically catered towards your optimal single pass deburring and edge rounding results.

EdgeBreaker® 5000

The EdgeBreaker® 5000 is built tough – this is necessary when it needs to easily remove slag caused by flame cutting.

EdgeBreaker® 6000

This universal deburring machine, deburrs and edge rounds small and large materials. On top of that, it also provides a surface finish, The EdgeBreaker® 6000 impresses with a very even edge rounding result. If necessary up to a 2 mm radius.

EdgeRacer®

The EdgeRacer® procceses thin parts, even three dimensional or deformed parts, double-sided in just one single pass. This makes the machine particularly economcial for medium to high quantities in industrial sheet metal processing.

Deburring small parts

Small plasma and flame cut parts go into the drum. It is the ideal solution for deburring small parts. Whether as a stand-alone machine or as a supplemental process to the efficient EdgeBreaker® series, it is the ideal solution for small parts.

EcoMaster®

The EcoMaster® parts leveler is distinguished by delivering outstanding results, easy operation and a maintenance friendly design. Even thin metal sheets and parts from 0.1 mm to 5 mm (0.005″ to 0.200″) thick are no problem at all for our EcoMaster® precision leveler.

FlatMaster®

The FlatMaster® produces flat stamped, laser-cut and plasma-cut parts almost entirely free of internal stresses in a matter of seconds. With thicknesses from 0.6 to 60 mm (0.20″ to 2.40″). Even with high-strength parts and sheets with cut-outs.

PlateMaster®

Processing large sheet metal parts and thick metal plates are jobs for the PlateMaster®. Specifically developed for rough sheet metal processing, the system is even capable of handling rusted and soiled plates as well as armor plates (AHSS).

FlatJack®

Faster and more precise measuring with the FlatJack® – our automatic flatness control system fitted directly onto the leveler. Your system for efficient and user-independent flatness testing.