Industrial washing, deburring and sheet levelling — the operations that come before or after blasting and that decide the final result. What equipment exists, what each one solves, and where it sits in the production flow.
The part comes off the laser with the right outline and the wrong shape. It rocks on the table, one corner sits high, the long edge waves. It will not hold tolerance at assembly, and every ripple shows up under paint. The first instinct is to blame the cutting machine. Usually that is not the […]
Levelling laser-cut sheet metal: why it warps and what actually fixes it Read More »
Practically every forming process leaves burrs. Casting, stamping, cutting, machining — all of them produce sharp edges that vary widely in shape. Burrs on parts machined at an angle are the hardest to remove. Why they are removed A burr is a sharp edge that cuts the operator’s hand, obstructs assembly and collects excess paint.
Industrial deburring: methods and when to choose each Read More »
The tunnel washing machine works on one principle: the part moves forward, the stages come to it. Parts sit on a stainless steel conveyor belt and pass through four successive zones. The four stages 1. Degreasing. An aqueous detergent solution, usually heated to 50–80 °C, is sprayed through nozzle manifolds from every direction. Temperature matters:
Industrial washing machines: how the tunnel works Read More »
Industrial washing cleans machined parts before the next operation. It removes machining oil, metal chips, grinding dust and residue left by earlier steps. This is not cosmetic. It is a technical condition. When it becomes mandatory Parts go through casting, stamping, machining or welding. Each of these leaves residue. If the part moves on dirty,
What industrial parts washing is and when you need it Read More »
